0) How do I update the firmware?
	
	- please read the corresponding section in the product manual.
	  Note: The firmware update process has been revised.
	  The previously referenced STM32CubeProgrammer may still be used for firmware updates. 
	  However, the new Ascher Racing SimHub Plugin is now the preferred and recommended method.
	  Please refer to the latest product manual for detailed instructions.


1) Ascher Racing SimHub Plugin can't find device (No DFU)

	- press and HOLD the top left push button on the wheel while connecting the coiled cable
	- firmware update is only possible via the coiled cable - NOT the internal USB-C connection
	
	- close 3rd party software that may block the STM32 bootloader, such as e.g. GSI SimOS
	
	- uninstall drivers that are known to block the STM32 bootloader, such as Thrustmaster FFB driver


2) How can I find out if the Thrustmaster driver is installed?

	- press WINDOWS key -> type "cmd" to open the console
	- type "driverquery" and press ENTER to list all installed drivers
	- the troublesome Thrustmaster driver will be listed as "tmhidusb Thrustmaster HID USB D Kernel"


3) How can I remove the Thrustmaster driver?

	http://www.uninstallhelps.com/how-to-uninstall-thrustmaster-ffb-wheel-driver1.html


4) I'm getting an error code while flashing the firmware

	- use a USB 2 port on the mainboard (STM32CubeProgrammer is known to have Windows USB driver issues with USB 3 ports)
	- if no USB 2 port is available -> use an external (powered) USB 2 Hub
	- external USB 3 Hubs will work as well since the troublesome Windows USB drivers won't be used

	- use another USB port
	- use another PC/ Laptop